06-09-2024, 11:02 PM
[center]![[Image: 40511e30e44e8a4148823c3596bfe422.jpg]](https://i124.fastpic.org/big/2024/0906/22/40511e30e44e8a4148823c3596bfe422.jpg)
Published 9/2024
Created by Dan Mill
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 49 Lectures ( 5h 12m ) | Size: 2.13 GB
[/center]
[center]
Master Routing Concepts with Practical Real-World Labs and Demonstrations
[/center]
What you'll learn:
How to configure OSPF in single and multi-area environments.
The fundamental concepts of internal and external BGP (iBGP and eBGP).
How to establish eBGP peering between different autonomous systems.
How to install and configure Cisco Modeling Labs for practical network simulation.
Configuring and verifying iBGP for internal network routing.
Best practices for configuring EIGRP in Cisco networks.
How to configure HSRP for gateway redundancy in routed networks.
The fundamentals of VRRP and how to implement it for redundancy.
Implementing GLBP for load balancing and redundancy in Cisco networks.
How to use Cisco routers for DHCP services and configure DHCP relay.
Importance of Static and Default Routes.
Requirements:
Basic understanding of networking concepts (IP addressing, subnets, etc.).
Enthusiasm to engage in lab-heavy, hands-on learning.
Access to a computer with internet connectivity.
Familiarity with Cisco IOS commands is helpful but not required.
Interest in learning practical Cisco routing configurations.
A desire to improve network configuration and troubleshooting skills.
Description:
Unlock the full potential of Cisco Labs in this hands-on course, Hands-On Cisco Labs: Routing Fundamentals. Whether you're new to networking or looking to sharpen your skills, this course will immerse you in practical, real-world routing configurations and concepts using one of the most powerful tools available.Cisco Modeling Labs (CML) is professional-grade, paid software designed by Cisco for creating, testing, and simulating complex network topologies. Unlike Packet Tracer or GNS3, CML uses real Cisco images, giving you access to the exact same software that runs on Cisco hardware. However, you don't need to worry if you're not ready to invest in the software just yet! In this course, I'll also show you how to access Cisco CML for free using the Cisco DevNet Sandbox, which allows you to use CML for up to four hours at a time at no cost.This course is designed to be lab-heavy and practical. We'll skip most of the theory and dive straight into configuring routing protocols, such as OSPF, EIGRP, BGP and more! You'll work through real-world examples and scenarios using CML, gaining hands-on experience that's invaluable for certification preparation or day-to-day work in network engineering.By the end of the course, you'll have a strong grasp of routing fundamentals, along with the confidence to apply what you've learned in real-world environments. You'll also be equipped with the knowledge and skills to continue exploring advanced configurations using Cisco Modeling Labs.Join us to take your networking skills to the next level with hands-on labs and real-world configurations using Cisco's powerful simulation tool!
Who this course is for:
Aspiring network engineers looking to gain hands-on experience with Cisco routing.
IT professionals preparing for Cisco certification exams.
Current network administrators seeking to deepen their knowledge of routing fundamentals.
Beginners in networking who want to start with practical, lab-focused training.
Homepage
Published 9/2024
Created by Dan Mill
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 49 Lectures ( 5h 12m ) | Size: 2.13 GB
[/center]
[center]
Master Routing Concepts with Practical Real-World Labs and Demonstrations
[/center]
What you'll learn:
How to configure OSPF in single and multi-area environments.
The fundamental concepts of internal and external BGP (iBGP and eBGP).
How to establish eBGP peering between different autonomous systems.
How to install and configure Cisco Modeling Labs for practical network simulation.
Configuring and verifying iBGP for internal network routing.
Best practices for configuring EIGRP in Cisco networks.
How to configure HSRP for gateway redundancy in routed networks.
The fundamentals of VRRP and how to implement it for redundancy.
Implementing GLBP for load balancing and redundancy in Cisco networks.
How to use Cisco routers for DHCP services and configure DHCP relay.
Importance of Static and Default Routes.
Requirements:
Basic understanding of networking concepts (IP addressing, subnets, etc.).
Enthusiasm to engage in lab-heavy, hands-on learning.
Access to a computer with internet connectivity.
Familiarity with Cisco IOS commands is helpful but not required.
Interest in learning practical Cisco routing configurations.
A desire to improve network configuration and troubleshooting skills.
Description:
Unlock the full potential of Cisco Labs in this hands-on course, Hands-On Cisco Labs: Routing Fundamentals. Whether you're new to networking or looking to sharpen your skills, this course will immerse you in practical, real-world routing configurations and concepts using one of the most powerful tools available.Cisco Modeling Labs (CML) is professional-grade, paid software designed by Cisco for creating, testing, and simulating complex network topologies. Unlike Packet Tracer or GNS3, CML uses real Cisco images, giving you access to the exact same software that runs on Cisco hardware. However, you don't need to worry if you're not ready to invest in the software just yet! In this course, I'll also show you how to access Cisco CML for free using the Cisco DevNet Sandbox, which allows you to use CML for up to four hours at a time at no cost.This course is designed to be lab-heavy and practical. We'll skip most of the theory and dive straight into configuring routing protocols, such as OSPF, EIGRP, BGP and more! You'll work through real-world examples and scenarios using CML, gaining hands-on experience that's invaluable for certification preparation or day-to-day work in network engineering.By the end of the course, you'll have a strong grasp of routing fundamentals, along with the confidence to apply what you've learned in real-world environments. You'll also be equipped with the knowledge and skills to continue exploring advanced configurations using Cisco Modeling Labs.Join us to take your networking skills to the next level with hands-on labs and real-world configurations using Cisco's powerful simulation tool!
Who this course is for:
Aspiring network engineers looking to gain hands-on experience with Cisco routing.
IT professionals preparing for Cisco certification exams.
Current network administrators seeking to deepen their knowledge of routing fundamentals.
Beginners in networking who want to start with practical, lab-focused training.
Homepage
Code:
https://www.udemy.com/course/hands-on-cisco-labs-routing-fundamentals/Quote:Buy Premium From My Links To Get Resumable Support and Max Speed
https://rapidgator.net/file/c2961852c6bf...1.rar.html
https://rapidgator.net/file/649cac414bbd...2.rar.html
https://rapidgator.net/file/3997e27f9a99...3.rar.html
https://nitroflare.com/view/FAEEB5B97D40....part1.rar
https://nitroflare.com/view/70FA3E4CCBAC....part2.rar
https://nitroflare.com/view/A9F721B4A203....part3.rar